HPCALB_EN=HPCALB_EN_0, PI_EN=PI_EN_0, PI_FREQ=PI_FREQ_0, HPCALB_VAL=HPCALB_VAL_0, DIS_PI=DIS_PI_0, HPTA_EN=HPTA_EN_0, HP_TS=HP_TS_0, RTC_EN=RTC_EN_0
SNVS_HP Control Register
| RTC_EN | HP Real Time Counter Enable 0 (RTC_EN_0): RTC is disabled 1 (RTC_EN_1): RTC is enabled |
| HPTA_EN | HP Time Alarm Enable When set, the time alarm interrupt is generated if the value in the HP Time Alarm Registers is equal to the value of the HP Real Time Counter 0 (HPTA_EN_0): HP Time Alarm Interrupt is disabled 1 (HPTA_EN_1): HP Time Alarm Interrupt is enabled |
| DIS_PI | Disable periodic interrupt in the functional interrupt 0 (DIS_PI_0): Periodic interrupt will trigger a functional interrupt 1 (DIS_PI_1): Disable periodic interrupt in the function interrupt |
| PI_EN | HP Periodic Interrupt Enable The periodic interrupt can be generated only if the HP Real Time Counter is enabled 0 (PI_EN_0): HP Periodic Interrupt is disabled 1 (PI_EN_1): HP Periodic Interrupt is enabled |
| PI_FREQ | Periodic Interrupt Frequency Defines frequency of the periodic interrupt 0 (PI_FREQ_0): - bit 0 of the HPRTCLR is selected as a source of the periodic interrupt 1 (PI_FREQ_1): - bit 1 of the HPRTCLR is selected as a source of the periodic interrupt 2 (PI_FREQ_2): - bit 2 of the HPRTCLR is selected as a source of the periodic interrupt 3 (PI_FREQ_3): - bit 3 of the HPRTCLR is selected as a source of the periodic interrupt 4 (PI_FREQ_4): - bit 4 of the HPRTCLR is selected as a source of the periodic interrupt 5 (PI_FREQ_5): - bit 5 of the HPRTCLR is selected as a source of the periodic interrupt 6 (PI_FREQ_6): - bit 6 of the HPRTCLR is selected as a source of the periodic interrupt 7 (PI_FREQ_7): - bit 7 of the HPRTCLR is selected as a source of the periodic interrupt 8 (PI_FREQ_8): - bit 8 of the HPRTCLR is selected as a source of the periodic interrupt 9 (PI_FREQ_9): - bit 9 of the HPRTCLR is selected as a source of the periodic interrupt 10 (PI_FREQ_10): - bit 10 of the HPRTCLR is selected as a source of the periodic interrupt 11 (PI_FREQ_11): - bit 11 of the HPRTCLR is selected as a source of the periodic interrupt 12 (PI_FREQ_12): - bit 12 of the HPRTCLR is selected as a source of the periodic interrupt 13 (PI_FREQ_13): - bit 13 of the HPRTCLR is selected as a source of the periodic interrupt 14 (PI_FREQ_14): - bit 14 of the HPRTCLR is selected as a source of the periodic interrupt 15 (PI_FREQ_15): - bit 15 of the HPRTCLR is selected as a source of the periodic interrupt |
| HPCALB_EN | HP Real Time Counter Calibration Enabled Indicates that the time calibration mechanism is enabled. 0 (HPCALB_EN_0): HP Timer calibration disabled 1 (HPCALB_EN_1): HP Timer calibration enabled |
| HPCALB_VAL | HP Calibration Value Defines signed calibration value for the HP Real Time Counter 0 (HPCALB_VAL_0): +0 counts per each 32768 ticks of the counter 1 (HPCALB_VAL_1): +1 counts per each 32768 ticks of the counter 2 (HPCALB_VAL_2): +2 counts per each 32768 ticks of the counter 15 (HPCALB_VAL_15): +15 counts per each 32768 ticks of the counter 16 (HPCALB_VAL_16): -16 counts per each 32768 ticks of the counter 17 (HPCALB_VAL_17): -15 counts per each 32768 ticks of the counter 30 (HPCALB_VAL_30): -2 counts per each 32768 ticks of the counter 31 (HPCALB_VAL_31): -1 counts per each 32768 ticks of the counter |
| HP_TS | HP Time Synchronize 0 (HP_TS_0): No Action 1 (HP_TS_1): Synchronize the HP Time Counter to the LP Time Counter |
| BTN_CONFIG | Button Configuration |
| BTN_MASK | Button interrupt mask |